*335 LED Strip, 60leds/meter

1. Color: White, Warm White, Yellow, Blue, Red, Green

2. Wattage: 4.8W per meter

3. Voltage: DC12V or DC24V

4. Types:

Non-waterproof for indoor, no protection on the PCB.

IP65 crystal epoxy waterproof for indoor, against dust and water-drop.

IP65 hollow silicone tube waterproof for indoor, against dust and water-drop.

IP68 fully silicone tube waterproof for outdoor, fully waterproof, can be used underwater for a long time.

Electrical Parameters:
Working Voltage (V): DC 12V:
Working Current (A): 0~600 mA/MW
Working Power (W): 0~2 W/M

Environmental Parameters:
Operating Temperature: -40°C ~ 60°C
Storage Temperature: -50°C ~ 80°C
Waterproofness: IP68, IP65, non-waterproof

Applications:
1. Ad words, ultra-thin light boxes, light words, luminescent signboard backlights;
2. Buildings, bridges, signboards and other decorative outline;
3. High-end stores, shopping malls, home and other indoor lighting;
4. Cars, corridors, staircases, furniture, show windows and other decoration, hidden location and indoor dark trough lighting;
5. Bars, KTV, cafes, stages and other entertaining places atmosphere rendering;
6. Salons, handicrafts and other high-end counter lighting.

Features:
1. Using ultra-thin FPC as the substrate, it can be freely bent with the features of the thickness of only 0.2mm, small size, rich color.
2. Light source adopts SMD 3528 and a loop every 3 lamps can be used according to requirements of any cut for the tangent (The use of a 24V power supply, compared with 6 lights a loop). or connection with every string up to 5 meters. The excess parts should be connected the lighting source in parallel.
3. With ultra-small size, width of only 10mm, 30 lights per meter, light, and power rate only 2.4 W, the standard length is 5 meters per roll, per roll of 150 lights.
4. Using DC12V safe voltage, non-waterproof series to paste 3M adhesive after the PFC board, protective layer can be torn to attach to any place for indoor; for waterproof series, two methods of epoxy (3M adhesive back stickers installation) or set tube (Snap installation) can be chosen for outdoor.

Packaging:
Appearance Package:  Anti-static vacuum bag
Carton Size: 39 * 23.5 * 26cm
Color: Brass
Weight: 0.16KG/ Bags

Notes:
1. Before usage, please note that the products use power supply DC12V(or DC24V), and there is polarity, “+” is for positive power supply, “-” for negative one.
2. Please pay attention to ESD protection, operating needs with electrostatic rings and static gloves for the products usage.